Stain & Seal Polyurethane
$30.00 – $55.00 Including GST
Artisan Stain & Seal Polyurethane is out new super durable, hard wearing translucent water-based, one step stain and sealer for use on raw timber and over painted surfaces. Available in six beautiful colours. Dries to a beautiful matte timber finish. Available in 200ml and 600ml jars.
Artisan Stain&Seal Polyurethane is a one step stain and sealer. Packed with polyurethane resin it is super hard wearing and suitable for use on kitchen benches, table tops, vanities and floors. Water-based and water-resistant Stain & Seal Polyurethane can be used to stain and seal raw timber, refresh precoated timber or even as a glaze over painted finishes. VOC free and virtually odourless, Stain&Seal Polyurethane can be applied with a damp sponge, brush or short nap roller. Depth of colour can be increased with additional layers. The sample boards show the difference between 1, 2 and 3 coats. Different effects can be achieved by layering different shades of Stain&Seal. Variations in timber grain can be evened out with careful application of this product, building up layers on lighter areas to colour correct the surface. Stain & Seal Polyurethane dries to a super matte finish and can be used to achieve a protected "raw stripped" appearance that is so on trend.
How to use: we recommend sanding and cleaning with Artisan Easy Scrub to ensure that the surface is clean and free from dirt, wax, oil, or flaking paint. Apply Stain&Seal Polyurethane with a damp sponge, working well into the grain and then finishing in long strokes with the grain. When applying to porous surfaces the first coat can be diluted up to 30% with water. Subsequent coats can be applied on a lightly water-misted surface to ensure smooth coverage. Normal drying time is 20-30 minutes, and the surface can be recoated after 2-hours. Sand with 400+ grit sandpaper between coats for a silky smooth finish. Leave to cure for seven days for best results. Dries to a matte finish, however if a sheen is desired apply a top coat of satin or gloss Artisan Polyvarnish, or apply a coat of Artisan Finishing wax and buff well.
To use as a glaze: apply to carved detail, pushing well into detail and wipe away excess using a damp cloth.
Coverage: Approximately 6–10 square metres per litre, depending on application technique and surface roughness
For technical specifications and safety advice on our full range, please click HERE
Additional information
| COLOUR | Onyx, Walnut, Fruitwood, Provincial, Driftwood, Limewash |
|---|---|
| SIZE | 200ml, 600ml |
